At Idaho Wrecker Sales we take pride in the craftsmanship we put in every truck. We are very aware that your safety and livelihood is at stake when you operate the equipment we provide. That is why we use top shelf material and follow strict wiring procedures when we assemble equipment.

• We use Stainless Steel heat Shrink connectors that provide protection from the elements and corrosion resistance to ensure proper conductivity. This has never been more important than now, due to the highly corrosive deicing materials used on roads today.
• We use Split Loom protective covering on all exposed wires. This protects wires from getting
chaffed or worn that will lead to failure.
• We always use a rubber or plastic grommet when passing wires through a hole. These along with the split loom ensure that the wires are never damaged.
• When routing wires through wrecker bodies, tool boxes or pylon we secure in a metal zip tie rod and zip tie the wires to the rod every 4 -6 inches to ensure the wiring is held in place and does not get damaged.
• We bring all of the wiring in a truck through a common junction box.
• We ground the junction box with a heavy gauge ground wire from the truck frame. We use star washers to ensure a good metal to metal contact is made on the ground cable.
• We provide you with a color coded wire diagram of you truck electrical system.